Duo Acrylgel Liquid 200 ml

Duo Acrylgel Liquid is a liquid that is necessary when extending and modeling nails with Duo Acrylgel.

What's his job? The liquid allows you to evenly distribute the thick gel on the plate without flowing onto the cuticles, making it easier for the stylist to work with the product. Duo Acrylgel Liquid is also suitable for cleaning brushes with which the manicure was made.

Another advantage is its efficiency - the product has a capacity of 200 ml.

Application with Tipsa Duo Acrylgel:

1. Gently polish the nail plate with a polishing block, remove the resulting dust with a brush and rinse the nails with a Cleaner.

2. Move the skins aside, and if necessary, cut them with pliers.

3. To increase adhesion, apply a thin layer of HARD BASE and cure in a LED lamp or a UV lamp according to the table.

4. Apply an appropriate amount of the product to the inside of the tips, taking into account the correct structure of the "C curve" (a small amount of the product should be around the cuticles and on the free edge, and more in the middle of the tips). a brush soaked in Duo AcrylGel Liquid.

5. Apply the prepared tips to the nail plate, pressing it gently. If the product gets on the cuticles, soak the Duo AcrylGel Liquid brush and then remove the dirt. Cure in a LED lamp or a UV lamp according to the table.

6. After taking your hand out of the lamp, gently remove the tips from the nail. Then give the final shape with a 180 grit file and smooth with a polisher. According to your preferences, we can also make any styling. 7. Apply the HARD TOP layer to give a very distinctive gloss. Cure in a LED lamp or a UV lamp, then rinses with a Cleaner.

Application with a template:

1. Gently polish the nail with a polishing block. Push back the cuticles, if necessary, remove them with a pair of pliers.

2. Place the form (templates) under the nail. Apply the product on 3/4 of the nail surface, then gently stretch the product downwards to obtain the desired length. The brush should be soaked in Duo AcrylGel Liquid so that it does not stick to the product. Cure in a LED lamp or a UV lamp according to the table. If we have a problematic plate, you can apply a thin layer of HARD BASE or Base Extra and harden in an LED lamp or a UV lamp according to the table. You can also use Primer.

3. After taking your hand out of the lamp, remove the mold and then apply the product again on 3/4 of the nail surface, then gently stretch up (under the cuticles) and down to cover the entire nail. The brush should be soaked in Duo AcrylGel Liquid so that it does not stick to the product. Cure in a LED lamp or a UV lamp according to the table.

4. After hardening, file the nail to give it the desired shape using a 180 grit file.

5. Apply the HARD TOP layer to give a very distinctive gloss. Cure in a LED lamp or UV lamp, then rinses with a cleaner.

Ingredients: INGREDIENTS: ISOPROPYL ALCOHOL, MEK, ISOBUTYL ACETATE, AROMA, ALIPHATIC URETHANE METHACRYLATE, CI 60725.